GeekVape T200 kit Review

GeekVape T200 kit Review - T200 kit review - geekvape

a freshly baked kit from GeekVape, which obviously works much more intensively than its competitors. The flagship of the brand a year and a half ago has undergone an update – the great and terrible aegis for two external batteries.

GeekVape T200 (Aegis Touch) kit

GeekVape T200 kit Review

Dimensions: 141.25 x 56.05 x 31.12mm
Weight: unknown
Body material: zinc alloy + plastic + silicone + eco-leather
Power supply: 2 x 18650
Chipset: AS-Chip 3.0
Power: 5 – 200W
Voltage range: up to 12V
Peak current: 45A
Operating mode: Power, TC (NI200, SS, TI), TCR, VPC, BYPASS, SMART
Temperature range: 200℉ – 600℉ / 100℃ – 315℃
Supported resistance: 0.1 – 2.0Ω
Protection: against low / high resistance, against overheating, against short circuit, against reverse polarity, against overcharging / overdischarging
Connector type: steel 510, pin is spring-loaded charging current: Type-C, charging current 2A Color: see the photo below


GeekVape T200 kit Review


– T200 (Aegis Touch) mod
– Z Sub ohm Tank 2021
– replaceable evaporators 2pcs 0.15 / 0.4Ω (one preinstalled) – spare
orings – spare
glass
– key
– Type-C cable
– user manual
– warranty card sign. It started just with the first revision of this box mod. Zero changes – except that the complete evaporators of the Z series have been updated – the service life of the latter has been doubled.

GeekVape T200 kit Review

GeekVape T200 kit Review
GeekVape T200 kit Review

Box mod, on the other hand, has changed significantly, but retained some of the “profitable” moments. Firstly, they did not change the set of decorative elements – metal, plastic, silicone, eco-leather. But what has really undergone modernization is the cut and location of these very elements. So the eco-leather insert now occupies the entire side panel, and not the back end. The front part was won back and filled almost “without a trace” by a huge display.

GeekVape T200 kit Review

The dimensions of the novelty cannot be called average – nevertheless, the width of 56mm for a two-jar copy is a decent figure. However, this is probably not a hindrance to normal ergonomics due to the rounded back, smooth edges and the well-placed controls.

GeekVape T200 kit Review

Like its predecessors, the novelty is protected from moisture / dust / careless handling according to the IP68 standard.

GeekVape T200 kit Review

The color scheme for boxing fashion from the start is offered decent, moreover, bright shades prevail in it.

GeekVape T200 kit Review

The landing pad is steel – with a silicone edging. In determining its maximum capabilities, you should not rely on the entire thickness of the case – they will obviously be more modest. The profile of the novelty, as you have noticed, is asymmetric – the back side is fairly rounded.

GeekVape T200 kit Review

The main place of the mod is given, without exaggeration, to a huge color display. Touch control, UI colors may change, information is provided naturally very large.

GeekVape T200 kit Review

A decent-sized start button is removed to the side face, right next to it is an uncovered modern-style connector for charging batteries with fast current. On the opposite end, the device lock slider that has become traditional has settled.

GeekVape T200 kit Review

Access to the battery compartment from the bottom. A hinged lid with a slider latch is laid around the perimeter with silicone.

GeekVape T200 kit Review

The novelty is controlled by an updated chipset of its own design. In addition to the usual last set of operating modes and options, there is an option for beginners.

GeekVape T200 kit Review

GeekVape T200 kit Review
GeekVape T200 kit Review

Official website of the manufacturer www.geekvape.com/