GeekVape Wenax K1 SE POD kit Review

A package with GeekVape products traveled to me for a very long time, therefore, the novelties have turned into far from novelties. Nevertheless, everything will be subjected to study, and you will naturally have to read all the thoughts I have stated.

GeekVape Wenax K1 SE POD kit

Dimensions: 114.4 x 21.6 x 11.4mm
Weight: 31.9g Body
material: aluminum alloy + plastic
Power supply: built-in 605mAh
Cartridge capacity: 2.0ml Vaporizer
resistance: 0.8 / 1.0 / 1.2Ω
Output power: 9 – 16W
Mode works:Power
Supported resistance: 0.4 – 3.0Ω
Protection: against low / high resistance, against overheating, against short circuit, against overcharging / overdischarging
Connector type: non-magnetic
Screen / diagonal: not provided
Micro-USB port / charging: Type-C, charging current 0.73A
Color: see photo below

Package
contents — Wenax K1 SE mod
— replaceable cartridge 1.0Ω (preinstalled)
— individual packaging
— packing box

The appearance of the novelty is also simple, how attractive, at least for me personally. This is a fairly compact stick of small thickness, which you do not want to let go of. The design is minimalistic – the only embellishment is the LED indicator of the original form. The logos are almost invisible – a great solution – I don’t like the abundance of inscriptions on devices. I will praise the design – it seems to be a well-worn form factor, but it turned out very nice.

In general, the device looks very knocked down and of high quality – I’m sure it will be pleasant to use this. The main body is made of aluminum, the weight is modest – everything is clear. Ergonomics is naturally decent.

I’ll start a detailed study with not the most pleasant news – there is only one cartridge in the kit. By the way, our hero can also digest the “shifts” of the WENAX K1 model. The mouthpiece of the reservoir is flattened, it is not wide – excellent performance. The capacity is naturally modest, but not lower than the standard value. Side fill – not quick access – standard size opening. But the latch of the plug is not the most convenient – it is short, located immediately under the cartridge lift. I repeat – “uncomfortable!”.

The tank itself sits perfectly in fashion – not a hint of play – it is fixed with latches. A connector platform with a microscopic reservoir for collecting condensate, however, the latter was almost not noticed during the tests. Adjustment of the tightening intensity is not provided – not to say that it is needed here. Although the puff seemed to me a bit loose for this kind of device – it’s rather a rather pressed hookah. In any case, this level does not pull on a real MTL.

The evaporator is built-in, the heating element is made in the form of a grid. Moreover, one can only guess about this, because even an elementary manual is not provided in the box. On the back of the box, there is only an infographic on how to refill the cartridge. As for the taste transfer, it is normal – adequate / good for the accessory segment. Now, if the puff could be pressed a little, then the concentration of taste would obviously increase – this is already noted in the pros “not shameful”. It’s also nice that the evaporator doesn’t squelch, doesn’t spit, and drinks the liquid to the end.

The main body is buttonless – the activation of the device is exclusively by tightening. Without passes, false positives and other obscenities – everything is clear here. The LED indicator of events is unobtrusive, moreover, it is beaten, I repeat, in a rather original way.

The built-in battery is average, if not good, for such capacity dimensions. A full charge cycle takes less than an hour – about 50 minutes – I can’t call this value fast. The charging connector is naturally Type-C, but the corresponding cable was clamped.

Impression
It turned out to be quite a decent copy – it’s very good to hold one in your hands! nice, and the functions assigned to it, it performs to the fullest. Qualitatively made, cute, and, perhaps, most importantly, compact – the most for the summer period. True, the latter, alas, is inevitably nearing its end. You can recommend the subject, except that the price tag, if I were the developers, would have been asked for a more modest one – after all, neither a spare cartridge nor a cable is included in the kit.

Price $14.6 (fasttech.com)